Multi-Font User's Manual

Enable printing of all character codes
IMode 1 ASCII I Decimal
I Hexadecimal I
1 IBM I <ESC> ‘Y’ nl n2 I 27 92 nl ni? 1 1B 5~ nI d
I
Enables printing of all characters in the IBM character set, including
those assigned to character codes which are normally considered
I.
control codes. This command remains in effect for the next nl + n2
x 256 characters, where nl and n2 are numbers between 0 and 255.
During this interval no control functions are executed. If a code with
no assigned character is received, the printer prints a space.
..-
Enable printing of all character codes on next
L
character
Mode ASCII Decimal
Hexadecimal
IBM cESC> “A” n
27 94 n 1B !iE n
This command operates like <ES0 ‘T’ except that it remains in
effect for only one character.
Select slash zero
c
Mode ASCII
Decimal Hexadecimal
cESC>
LL_W 6‘ *.
Std. 1 27126 49 1B 7E 31
cESC> “.%” <l> 27126 1 1B 7E 01
Causes subsequent zero characters to be overprinted with a slash ($3).
Select normal zero
Mode
ASCII Decimal
Hexadecimal
<ESC> “_W 6‘ 0 9. 48 1B
Std.
27126 7E 30
<ESC> a‘..." <o> 27126 0 1B 7E 00
1
i.
Causes subsequent zero characters to be printed normally (0),
without a slash.