Multi-Font User's Manual

Table Of Contents

Select double or quadruple size

Mode ASCII

Decimal

Hexadecimal

Std.

cESC> “h” n 27104 n

18 68 n

Selects the size of subsequent characters as shown below. Extra-

high characters align along the cap-line of normal characters, with

the base line temporarily moving down. Line spacing is temporarily

doubled when n = 1 and quadrupled when n = 2.

n Effect

0 Normal size

1 Double-high, double-wide

2 Quadruple-high, quadruple-wide

Select character size

Mode ASCII Decimal

Hexadecimal

Bo* ..(,. ..(.. “S” ..).. .‘)..

d 4040934141 d 2828532929 d

Selects a combination of character height and width according to the

value of d, as below.

Does not move the base line.

d Line spacing

Character height

0 Single width Single weight

1 Double width Single height

2 Single width

Double height

3 Double width

Double height

Double-height characters are always printed at near letter quality.

Double height printing temporarily cancels the super/subscript and

condensed printing modes, but these modes resume when the printer

mums to normal mode.

Print double-height characters

Mode ASCII

Decimal

Hexadecimal

Std. <pJC> ..wI. “1”

27 119 49 1B 77 31

27 119 1 1B 77 01

Prints subsequent characters at double height without moving the

base line, and without changing the line spacing. Temporarily

cancels super/subscript and condensed modes.