Multi-Font User's Manual

Return to top of current page
Mode ASCII
Decimal
Hexadecimal
Std.
<Esc> m> 27 12
16 oc
Feeds the paper backward to the top of the current page. Ignored
when the friction feed is used.
Disable paper-out detector
Mode ASCII Decimal
Hexadecimal
Both
<ESC> “8” 27 56
16 38
Causes the printer to disregard the signal sent by the paper-out
detector, enabling printing to the bottom of the paper. Overrides the
setting of Memory Switch.
Enable paper-out detector
Mode ASCII Decimal
Both
cESC> “9” 27 57
Hexadecimal
lB, 39
Causes the printer to stop printing before the end of the paper.
Overrides the setting of Memory Switch
Set vertical tab stops
Mode
ASCII Decimal
Hexadecimal
Both &SC> “B” nl n2
. . . . CO>
27 66 nl n2 . . . 0 1B 42 nl d . . . 00
Cancels ah current vertical tab stops and sets new vertical tab stops
at lines nl, n2, etc., where nl, n2, etc. are numbers between 1 and
255. A maximum of 16 vertical tab stops can be set. The tab stops
must be specified in ascending order, any violation of ascending
order terminates the tab stop list. Standard termination is by the co>
control code. The vertical tab stops ate set in terms of the current line
spacing and do not move if the line spacing is changed later.
83