Multi-Font User's Manual

Table Of Contents

GRAPHICS COMMANDS

Print normal-density graphics

Mode ASCII

Decimal Hexadecimal

Both

cESC> “K” nl n2 27 75 nl n2 10 40 nl n2

ml m2 . . .

ml m2 . . . ml tn2 . . .

Prints bit-image graphics at 60 dots per inch horizontally. The

graphic image is 8 dots high and nZ +n2 x 256 dots wide. Maximum _

width is 8 inches (480 dots) for normal carnage printer, and 13.6

inches (816 dots) for wide carriage printer. ml, m2, . . . are the dot - -

data, each a l-byte value from 0 to 255 representing 8 vertical dots,

with the most significant bit at the top and the least significant bit at

the bottom. The number of data bytes must be nZ +nZ x 256. Dots

beyond the right margin are ignored. At the end of bit-image printing

the printer returns automatically to character mode.

Print double-density graphics

Mode ASCII Decimal Hexadecimal

Both

<ESC> “L” nl n2 27 76 nl ti? 10 4C nl n2

ml m2 . . . ml m2 . . .

ml m2 . . .

F%nts bit-image graphics at 120 dots per inch horizontally (maxi-

mum 960 dots wide for nonnal carriage printer, 1632 dots for wide

carriage printer). See <ESC> “K” for other information.

Print double-density, double-speed graphics

[Mode 1 ASCII 1 Decimal 1 Hexadecimal 1 -

Both

<ESC> “Y” nl n2

27 69 nl n2 10 S nl n2

ml m2 . . . ml m2 . . . ml m2 . . .

prints bit-image graphics at 120 dots per inch horizontally (maxi-

mum 960 dots wide for normal carriage printer, 1632 dots for wide

carriage printer), skipping every second dot in the horizontal direction.

See &SC> “K” for other information.