Multi-Font User's Manual

[ Set top margin

Both 1

<ESC> C

1Bh

63h

27 99

<n>

Cn>

The command above sets the top margin, where o1> is a binary value which specifies

the height of the top margin to the first printed line in lines (at the current line pitch

setting). Printing will start on the (ol>+lth) line on the page. Subsequent changes

to the line pitch setting will not affect this value.

1 Set bottom margin

Both 1

<ESC>

N <n>

1 1Bh 4Eh

en> I

1 27

Cn>

The command abolre sets the bottom margin, where cn> is a binary value specifying

the bottom margin depth in lines at the current line pitch setting. If the page length

is reset (with the +&XX or cESC>C<NUL> commands), the effect of this

command will be lost. Subsequent changes to the line pitch setting, however, will not

affect the length set by this command.

) Cancel top and bottom margins

Both )

1 <ESC> 0

1Bh

4Fh

27 79

The command above cancels the settings for top and bottom margins. There are no

parameters.

Set left and right margins

<ESC> X

<n, Cn,

Both

1 1Bh

58h

<II> CID

<to <n>

The command above sets the left and right margins, where the two values repre-

sented by the cnx are binary numbers used for setting the left and right margins

respectively. Margins are set at the current horizontal pitch.