Multi-Font User's Manual

Chapter 3
OPTIONAL ACCESSORIES
15RMII)
You can select the following accessories as option.
l Automatic sheet feeder (SF-lODMII/15DMII, SF-lORMII/
l Pull tractor unit (PT-lOXIW5XM)
l Serial interface cartridge (IS-8XL)
l Buffered parallel interface cartridge (IP-128XL)
This chapter describes how to install these optional accessories.
NOTE : When you install or remove the optional accessories, turn off the
power switch.
AUTOMATIC SHEET FEEDER
You can use the Automatic Sheet Feeder to print on single sheets.
This printer can be used either a Single-bin type or Dual-bin type Automatic
Sheet Feeder.
Single- Bin A utoma tic Sheet Feeder
(SF- 1 ODMIUI 5DMII)
The procedure to mount the Single-Bin ASF is:
1. Open the front cover by lifting up the back using the two grips on either
side, then swing down the transparent part (see Figure 3-l).
2. Open the rear cover by lifting up the front using the two grips on either
side, then remove it upward.
If the paper guide is installed, remove it before taking off the rear cover.
3. Move the bail lever on top of the printer forward to open the paper bail.
13