Multi-Font User's Manual

Store Macro Definition
You can store the current settings to the printer for later use with the
following procedure:
1. Press the I ON LINE
1 button to set the printer off-line.
2. Press the I button and hold it down.
3. While holding the IFoNT button down, press the I button and
hold them down until the two beep tones heard.
4. Release both buttons at the same time after the beep tones to store the
current setting.
If you release these buttons after the three beep tones, the macro is
cleated.
NOTE : You can store the following settings with this procedure.
l Current Font and Pitch
l Current auto-loading amount for cut sheet
l Current auto-loading amount for continuous paper
l Current auto-loading amount in ASF mode
l Current print color
Data to be stored are controlled in Standard mode and IBM mode separately.
For example, the data stored in the Standard mode ate not effective in the
IBM mode, and vice versa.