Multi-Font User's Manual
Table Of Contents
- 挀漀瘀攀爀
- 䠀伀圀 吀伀 唀匀䔀 吀䠀䤀匀 䴀䄀一唀䄀䰀
- 吀䄀䈀䰀䔀 伀䘀 䌀伀一吀䔀一吀匀
- 䌀栀愀瀀琀攀爀 䤀一吀刀伀䐀唀䌀吀䤀伀一
- 䌀栀愀瀀琀攀爀 ㈀ 匀䔀吀吀䤀一䜀 唀倀 吀䠀䔀 倀刀䤀一吀䔀刀
- 䌀栀愀瀀琀攀爀 ㌀ 伀倀吀䤀伀一䄀䰀 䄀䌀䌀䔀匀匀伀刀䤀䔀匀
- 䌀栀愀瀀琀攀爀 㐀 倀䄀倀䔀刀 䤀一匀吀䄀䰀䰀䄀吀䤀伀一 䄀一䐀 唀匀䔀
- 䌀栀愀瀀琀攀爀 㔀 䌀伀一吀刀伀䰀 倀䄀一䔀䰀 伀倀䔀刀䄀吀䤀伀一匀
- 䌀栀愀瀀琀攀爀 㘀 匀䔀吀吀䤀一䜀 吀䠀䔀 䴀䔀䴀伀刀夀 匀圀䤀吀䌀䠀䔀匀
- 䌀栀愀瀀琀攀爀 㜀 倀刀䤀一吀䔀刀 䌀伀一吀刀伀䰀 䌀伀䴀䴀䄀一䐀匀

Perform one n/216=inch line feed
Mode ASCII Decimal
Hexadecimal
Both &SC>
“r’ n
27 74 n
l04A n
Feeds the paper once by n/21 6 inches, where n is between 1 and 255.
Does not move the print position right or left in the standard mode.
Does not change the line-spacing setting.
Perform one n/216=inch reverse line feed
Mode ASCII
Decimal
Hexadecimal
Std. cESC> “r n
27106 n
1E 6A n
Feeds the paper once by fl16 inches in the reverse direction, where
n is between 1 and 255.
Does not move the print position right or left Does not change the
line-spacing setting.
Feed paper n lines
Mode ASCII
Decimal
Hexadecimal
Std.
cESC> “f’ “1” n
27 102 49 n
1B 66 31 n
<ESC> “f’ cl> n
27 102 1 n
1B 66 01 n
Feeds the paper n lines from the current line, where n is between 0
and 127.
Set top of page at current position
Mode
ASCII
Decimal Hexadecimal
IBM
<ESC> “4”
27 52 18 34
Sets the current position as the top-of-page position Note that this
can also be done from the control panel.
81