Multi-Font User's Manual

PULLTRACTORUNIT(PT-10XM/15XM)
You can use the Pull TractorUnitto printon fanfoldforms or multi-part
folms.
Theprocedureto mountthePullTractorUnitis:
1. ~ti~nt~verbylitigupti backusingthetwogripson either
side,thenswingdownthe transpanmtpart (seeF&w 3-l).
2. @nthe marcoverby liftingup thefrontusingthetwo gripson either
side,thenremoveit upward.
Ifthepaperguideisinstalled,~move itbefo~ takingoffthemarcover.
3. Movethebailleverontop oftheprinterfonvard toopenthe paperbail.
4. Squeemthe
sidesofthepaper supportslightly,andinsertintothe holes
on both sideofthe PullTractorUnitas shownin Figu~ 3-10.
FiguiwWO. Mournrhe paperaupportA and B ontothe PullTractorUnit.
5. Fit the mountingbracketsof the PullTractorUnitontothe shaftof the
printermechanism,tiltingthePullTractorUnitslightlybackward.
6. SecuxethePullTractorUnitfinnlybyloweringitintoposition,asshown
in Figure3-11.
7. Closethefrontcoverwiththe transpiumtpart in the openposition.
20