Hardware manual

- 17 -
4. Using the printer
4.1. Control panel
u
Button
FEED Button :
When the printer is on, paper can be feed manually by pressing and holding the
FEED button for more than one second.
MODE Button :
1
When of 5 or more seconds presses and power comes to on or off.
2
After pressing the MODE button simultaneously, if the ERROR lamp 5 turn
signals MODE button is converted with MODE functions.
MODE functions are for use to change communication mode.
(Refer to 2.5. Memory switch settings for details about mode conversion)
u
Panel lamp
ERROR (Red) : Indicated a fault condition or a printer error.
(i.e : no paper, paper cover opened. etc.)
POWER (Green) : Printer is ON and ready to receive data.
ERROR
POWER
FEED
MODE
Bluetooth Mode
Battery capacity status
Bluetooth connection status
Mode status
Display data transmission