Dot Matrix Printer Users Manual

6. Lower the rear side of the Automatic Sheet Feeder and attach it to the
holder shaft.
7. Install the printer cover provided with the Automatic Sheet Feeder.
I
Figure 7-4. Installthe printercover.
8. Insert the hopper attachment on top of the hopper support section as
shown in Figure 7-5.
I
Figure 7-5. Insert the hopper attachment.
9. Insert the stacker attachment intothe holder on the front part of the sheet
feeder.
NOTE: Theflat sideofthe attachment shouldbelocated to the rear, as shown
in Figure 7-6.
Now, you can use the ASF by installing the paper stack into the hopper.