Dot Matrix Printer Users Manual

Loading paper
1. Open the printer cover.
2. With the tractor covers open, guide the paper from the bottom of the
printer, by aligning holes with the pins on the tractor unit.
Figure 7-15. Mount the fanfold paper from the bottom of the printer.
3. Adjust the spacing of thetractorunitsby slidingthem along thebar, using
the clamp lever at the back of each unit to release and lock them in
position. When the lever is up, the unit is released, and when it isdown,
the unit is locked.
4. Now close the tractor covers, again making sure that the paper holes are
aligned with the pinson the tractor units. If they are not aligned properly,
you will have problems with paper feeding, possibly resulting in tearing
and jamming of the paper.