User Manual

– 7 –
3-3-2. Using 57.5 mm Width Paper Roll
When using a paper roll with 57.5 mm width, install the supplied paper guide on the printer.
To change the eective print width (roll paper width), change the setting of the Print Width in
the Conguration. For details on the setting of the Print Width, refer to the soware manual
located in the “Documents” folders on the CD-ROM.
1 Insert the paper guide along the groove in the unit as shown.
2 Insert the paper guide by pushing the area marked “A” down until it clicks into place.
Note: Aer using a paper roll with a width of 57.5 mm, do not change to a paper roll with
a width of 79.5 mm. (is is because the printer head has deteriorated as a result of a
portion of the head having been in direct contact with the platen.)
Paper Guide
A