User Manual
Table Of Contents
- TSP100LANHardware Manual
- TABLE OF CONTENTS
- 1. Unpacking and Installation
- 2. Parts Identification and Nomenclature
- 3. Setup
- 4. Attaching the Accessories
- 5. Thermal Roll Paper Specification
- 6. Control Panel and Other Functions
- 7. Preventing and Clearing Paper Jams
- 8. Periodical Cleaning
- 9. Peripheral Unit Drive Circuit
- 10. Specifications
- 11. DIP Switch Settings
– 17 –
5. Thermal Roll Paper Specication
When consumable parts have run out, use those specied below.
5-1. Roll paper specication
ermal paper
ickness: 57~85 µm
Note: When using thin paper with a thickness of less than 65 μm, only the F5041
(Mitsubishi HiTec Paper Flensburg GmbH),TF50KS-E2D (Nippon Paper In-
dustries) and P300/P310 (KSP) paper types are recommended.
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80 mm or (58 mm when the paper roller holder is used)
Core outer/inner diameter
Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
5-2. Recommended paper
Note: 1) e print density may vary depending on the type of roll paper, operating envi-
ronment, and power consumption mode.
2) A reader or scanner may not be able to scan a printed bar code or characters
depending on the print density. Make sure that your reader or scanner is able to
scan correctly beforehand.
Manufacturer Product name Quality characteristics/Use Paper thickness (µm)
Mitsubishi Paper
Mills Limited
P220AG normal type paper 65 (thickness)
HP220A high image stability paper 65 (thickness)
HP220AB-1 high image stability paper 75 (thickness)
Mitsubishi HiTec Pa-
per Flensburg GmbH
F5041 normal type paper 60 (thickness)
Oji Paper Co., Ltd.
PD150R normal type paper 75 (thickness)
PD160R high image stability paper
75 (thickness)
PD170R high image stability paper 75 (thickness)
PD190R
middle image stability paper
75 (thickness)
Nippon Paper Industries
TF50KS-E2D normal type paper 59 (thickness)
Kanzaki Specialty
Papers Inc. (KSP)
P320RB 2 color paper: Red & Black 65 (thickness)
P320BB 2 color paper: Blue & Black 65 (thickness)
P300/P310 normal type paper 57/58 (thickness)
Note: e P300/P310 (KSP) paper types cannot be used when the printer is positioned vertically.
+ 0.5
-1
+ 0.5
-1
Note: Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm