User Manual

– 19 –
3) Paper cut error
Error Description READY Lamp ERROR Lamp Recovery Conditions
Paper cut error O Flashes at
0.125-second
intervals
Recovered by turning the power OFF,
eliminating the cause of the error such as
jammed paper, returning the cutter to its
home position, and turning the power ON
(see 7-3).
Note: If the cutter does not return to its home position or does not perform the initial
movement, it will result in a non-recoverable error.
4) Paper detection error
Error Description READY Lamp ERROR Lamp Recovery Conditions
Paper out error Flashes at
0.5-second
intervals
Automatically recovered by loading a new
paper roll, then closing the printer cover.
5) Network errors
Error Description READY Lamp ERROR Lamp Status Recovery Conditions
Network Connection
Normal
On TCP/IP
Communications
Possible
Network Not
Connected
(Physically
Disconnected)
Two ashes (at
0.125-second
intervals) repeated
every two seconds
Physically
disconnected(e
Ethernet link is
down.)
Check the cable and
hub/router,
then restart the power.
Network Not
Connected (No IP
Address)
Flashes at 0.125-
second intervals
Could not attain
IP address when in
DHCP/BOOTP.
Check the
DHCP/BOOTP server.
en restart the power.
When static
IP address setting
value error
Initialize the settings
using the DIP switch,
then restart with the
correct value.