User Manual
Table Of Contents
- TSP100LANHardware Manual
- TABLE OF CONTENTS
- 1. Unpacking and Installation
- 2. Parts Identification and Nomenclature
- 3. Setup
- 4. Attaching the Accessories
- 5. Thermal Roll Paper Specification
- 6. Control Panel and Other Functions
- 7. Preventing and Clearing Paper Jams
- 8. Periodical Cleaning
- 9. Peripheral Unit Drive Circuit
- 10. Specifications
- 11. DIP Switch Settings
– 23 –
(4) Insert a Philips screwdriver into the manual operation hole on the side of the cutter, and
turn it in the direction of the arrow shown on the right until the rear cover is opened.
(5) Open the printer cover, remove any jammed paper, and then reinstall the paper roll.
(6) Install the front cover, and then set the power switch to ON.