Installation Instructions Part 1

32 Chapter2:SitePreparation
iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide
PartNumberD02698GSRevA1|November2013
STAR SOLUTIONS CONFIDENTIAL
VerifyingTemperatureControl
VerifythefunctionalityoftheairconditioningunitstoensuretheQuadPACwill
neverbesubjectedtotemperaturesandhumiditylevelsoutsidetherangeslisted
inTable 11
.
InspectingandVerifyingSiteConditions
Thesiteshouldbecleanandfreeofobstructions.
Donotplacecomponentsorotherequipmentdirectlyontheground.
Ifsiteconditionsdonotcomply,contactthesitemanagerorfacility
representative.
Iftheinstallerisnotresponsibleforcorrectingnotedshortfalls,notifyresponsible
individualsofanydeficienciesassoonaspossible.Deficienciesmustbecorrected
beforecommencinginstallation.
Installationofancillaryequipment(forexample:powersupplies,cableracks,
batteries)istheresponsibilityoftheinstaller.
SiteInstallationChecklist Thefollowingchecklistisprovidedtoassistinthesiteplanningprocedure.After
completingtherequiredsteps,checkthemoff,orreferbacktothislist,toensure
allsiteplanningrequirementshavebeenmet:
■ Reviewpersonnelrequirements
■ Gatherrelateddocumentation
■ Verifypower
■ Verifythegrounding
■ Verifysiteconditions
■ Verifytemperaturecontrol
■ Reviewstandardequipmentracklocationspecifications
■ Reviewequipmentmountingguidelines
■ PreparethesitefortheQuadPAC
Table 11TemperatureandHumidity Ranges
Temperature/HumidityCondition Range
Operatingtemperature 32°to104°F(0°to40°C)
Operatinghumidity 0to95%(non‐condensing)
Non‐operatingshippingandstorage
temperature
‐13°to+167°F(‐25°to+75°C)
Non‐operatingshippingandstorage
humidity
0to100%(non‐condensing)