Installation Instructions Part 1

InstallingtheQuadPAC 37
iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide
PartNumberD02698GSRevA1|November2013
STAR SOLUTIONS CONFIDENTIAL
MountingtheQuadPACinto
theRack
RefertoFigure 6andFigure 7forthefollowinginstructions.
TomounttheQuadPACintherack:
1 TilttheQuadPACunit,puttheunitinsidetherackandensurethemountingear s
areoutsidetherack.SeeFigure 6
.
2 LifttheQuadPACunituptothecorrecthorizontalposition.SeeFigure 7
3 UsingaPhillips#2screwdriver,connecttheQuadPACunittotherackwiththe
flatwasher,lockwasherandM6screws.Use2screwsetspercorner.
4 Ensureallfourcornersareattachedusingatotalof8screws.
Thelockingwashershouldalwaysbein‐betweenthescrewandtheflatwasher.
Figure 6TiltingtheQuadPACtogetitintotheRack
Figure 7MountingtheQuadPACintheRack