Installation Instructions Part 1

38 Chapter3:QuadPACInstallation
iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide
PartNumberD02698GSRevA1|November2013
STAR SOLUTIONS CONFIDENTIAL
Grounding GroundtheQuadPACiusingthe1Uchassis.
TogroundtheQuadPAC:
1 Usingthe#2Phillipsscrewdriver,removeoneofthesetsofrackmountscrews,
lockwashersandflatwashers.
2 Replacetheflatwasherwiththegroundcableslug.
3 Usingthe#2Phillipsscrewdriver,re‐installthescrew,lockwasherand
ground
cableslug.(SeeFigure 8
.)
4 Usingthe#2Phillipsscrewdriver,screwtheothersideofthegroundcableinto
thegroundingrod.
Figure 8Grounding