Installation Instructions Part 1

StatusLED 51
iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide
PartNumberD02698GSRevA1|November2013
STAR SOLUTIONS CONFIDENTIAL
StatusLED TheQuadPAChasasingleexternalstatusLEDthatdisplaysthestateoftheunit.
Thisallowstheusertodeterminethestateofthesystembeforeother
communicationmethods,suchasanIPconnection,havebeenesta blished.
TheQuadPAChasstatusLEDsontheDO‐BTS,ClockandCPUModules.
TheLED
behavioroneachmodulerepresentsthestatusofthatspecificmodule.
Table 16
liststherelationshipbetweentheLEDbehaviorandthestatusofeach
module.
Table 16StatusLEDBehavior
LEDBehavior SystemState ServiceProvided
DO‐BTSModule
Off Notpowered. No
SolidRed Systembooting. No
BlinkingRed Systeminitializing. No
Alternating
Green/Red
RFinitializin g. No
BlinkingGreen Timingsynchronizing.
CellularRFnottransmitting.
No
SolidGreen Timingcomplete.
RFtransmitting.
Yes
ClockModule
Off Notpowered. No
SolidRed Clockinitializing. No
SolidGreen Clocksynchronized. Yes
CPUModule
Off Notpowered. No
SolidGreen Poweredon Yes