Manual Part 2

Table Of Contents

72 Chapter6:QuadPACParameterConfiguration

iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide

PartNumberD02698GSRevA1| November2013

STAR SOLUTIONS CONFIDENTIAL

CheckingtheRNCstatus VerifyingthestatusoftheQuadPACRNCelementcanbedoneusingeitherthe

CEMortheHTTPsummarypage.

TochecktheRNCStatususingtheCEM:

1 IntheCEMExplorertree,selectRNCFunction.

2 NavigatetotheStatetab.SeeFigure 47

.

3 VerifythattheOperationalStateparameterissettoenabled.

Figure 47CheckingtheRNCStatususingtheCEM

TochecktheRNCStatususingHTTPsummarypage:

1 Openawebbrowser.

2 EntertheRNCIPaddressintheaddressbarinthefollowingformat:

http://<rncipaddress/rnc/

See

Figure 48.

3 Checkthelistedstatusestoconfirmtheyareasexpected.

4 Whencheckingthestatuses,redmeansoff,ambermeansstartingornotinuse,

andgreenmeansoperational.