Manual Part 2

UsingtheCEMConsole 95
iCell®QuadPACIP‐RANEV‐DOQuadPACInstallationandInitialConfigurationGuide
PartNumberD02698GSRevA1| November2013
STAR SOLUTIONS CONFIDENTIAL
Figure 65DO‐BTSFunctionConfigurationTabs
Pop‐upMenus Thissectionincludes:
■ RNCFunctionPop‐upMenu
■ DO‐BTSFunctionPop‐upMenu
ThemajorityofCEMcommandsareprovidedinpop‐upmenusaccessedby
right‐clicking anelementintheleft‐handpaneoftheCEMconsolemainwindow.
Eachpop‐upmenuisspecifictothetypeofelementselected.
Thepop‐upmenucanchangebasedonthestateof
theequipment.Forexample,
menuitemsmaynotappearwhentheequipmentisdownandsomemenuitems
aredisabled/greyed‐outwhenaprerequisiteactionhasnotyetbeenperformed.
CEMdisplaystheQuadPACnetworkelementsassub‐elementsoftheSystem
NameassignedtotheQuadPAC.
Additionalsub‐elementsalsoprovidepop‐upmenuswithfeaturessimilartothose
describedinthissection.Thosepop‐upmenusarenotdocumentedinthisguide.