User's Manual

Orion Reader System Guide
6-28 Use or disclosure of Proprietary Information contained on this sheet is subject to the restriction stated on the title page of this document.
6-33 list the command and response data.
Get Buffered TagTransaction Mode
This command gets the buffered tag transaction mode from the reader. The mode con-
trol byte is returned as 0 for real-time mode or 1 for buffered mode. Table 6-34 and
Table 6-35 list the command and response data.
Set Data AcknowledgeTime-out Period
This command sets the reader’s data acknowledge time-out period in milliseconds.
Table 6-36 and Table 6-37 list the command and response data.
Table 6-32 Set BufferedTagTransaction Mode Command (0016H)
Set BufferedTagTransaction Mode Command Data Data Payload
Set Buffered Tag Transaction Command 0016H
Mode Control Byte: 0 = Real-Time Mode, 1 = Buffered Mode XXH
Table 6-33 Set BufferedTagTransaction Mode Response
Set BufferedTagTransaction Mode Response Data Data Payload
Set Buffered Tag Transaction Command 0016H
Table 6-34 Get BufferedTagTransaction Mode Command (0017H)
Get BufferedTagTransaction Mode Command Data Data Payload
Get Buffered Tag Transaction Command 0017H
Table 6-35 Get BufferedTagTransaction Mode Response Data
Get BufferedTagTransaction Mode Response Data Data Payload
Get Buffered Tag Transaction Command 0017H
Mode Control Byte: 0 = Real-Time Mode, 1 = Buffered Mode XXH
Table 6-36 Set AcknowledgeTime-out Period Command (0018H)
Set Data Acknowledge Time-out Period Command Data Data Payload
Set Data Acknowledge Time-out Period Command 0018H
Communication Protocol XXH