User's Manual

Titan Quick Start Guide - Version 0.46 1
Attention
The Titan RFID reader described in this Quick Start Guide is a commercial product and must be installed by
professional installer.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a minimum separation distance of at least 1
meter from any person and must not be co-located with any other transmitter.
Site License Disclaimer
Users of the Titan RFID reader acknowledge that a site license is required when the device is configured for FCC
Part 90 regulations. It is the user’s responsibility to file for the site license and submit the appropriate fees and
payments to the regulating authority. United States filings require submission of FCC Form 601 with Schedule
D and H. Canadian filings require submission of Industry Canada forms IC2365BB and IC2430BB.
Licence d'Etat-client Avertissement
Client (utilisateur final) reconnaît que le site d'une licence est requise pour chaque lecteur emplacement du
système. Il incombe au client de déposer pour la licence d'exploitation et soumettre le paiement du dépôt
approprié. Unis dépôts États exigent l'achèvement et la soumission du formulaire FCC 601 à l'annexe D et H.
dépôts canadiennes exigent l'achèvement et la soumission de Industrie Canada Formulaires IC2365BB et
IC2430BB.
Changes or Modifications
Changes or modifications to the Titan RFID reader not expressly approved by Star Systems International Ltd.
could void the user’s authority to operate the Titan RFID reader.
WARNING
This equipment complies with FCC Part 90 and Industry Canada.RSS-137 rules. This device complies with FCC
Part 15 and Industry Canada license exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme à FCC Partie15 de Industrie Canada RSS standard exempts de licence (s). Son
tilisation est soumise à Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer ’interférences
et (2) cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un
mauvais fonctionnement du dispositif.
WARNING: Class B devices
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case users will be required to correct the interference at
their own expense.
Antennas
This radio transmitter (Titan RFID reader <insert certification number>) has been approved by Industry Canada
to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types
not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.