Stepper Machine User Manual

Pro Stepper Service Manual

Pro Stepper 637

-1017 Rev B

Preventive Maintenance

To keep your Star Trac Pro Stepper in top condition, Star Trac strongly recommends performing

regular daily, weekly and monthly preventive maintenance routines outlined below.

Daily Maintenance

Remove excessive accumulations of dust, dirt and other substances by using a clean, soft cloth

and a non-abrasive liquid cleaner, such as Formula 409™ or FANTASTIK™. Wipe down the

exterior of the display panel, pedals, shrouds and heart rate grips.

Note: Do not spray directly on the display or heart rate grips.

Spray on the cloth first then wipe the display.

Weekly Maintenance

Perform the following services each week:

• Vacuum the floor under and around the Pro Stepper. Move the unit to another spot, if

necessary, to vacuum thoroughly.

• Inspect the screws (i.e. display panel mounting screws) for security, and retighten if

necessary.

• Inspect the display panel keypads for wear.

Monthly Maintenance

Perform all the steps in weekly maintenance plus the following services each month, or as

needed:

• Check that the pedals and shrouds are secure.

• Check for smooth and quiet operation of all moving parts.

PAGE 1
Pro Stepper Service Manual Preventive Maintenance To keep your Star Trac Pro Stepper in top condition, Star Trac strongly recommends performing regular daily, weekly and monthly preventive maintenance routines outlined below. Daily Maintenance Remove excessive accumulations of dust, dirt and other substances by using a clean, soft cloth and a non-abrasive liquid cleaner, such as Formula 409™ or FANTASTIK™. Wipe down the exterior of the display panel, pedals, shrouds and heart rate grips.
PAGE 2
Pro Stepper Service Manual Preventive Maintenance – Cont’d Quarterly Maintenance Perform all the steps in weekly and monthly maintenance plus the following services each month, or as needed: Remove the return springs form the chains: • Raise and lower the pedal arms and inspect for smoothness. Binding or excessive looseness might indicate a worn bushing. • Rotate the clutch sprocket and inspect for smoothness.