Fitness Electronics User Manual

11 620-7991 Rev 002
STEP 4.
Remove the cap cover with the Star Trac logo
from the back cover plastics by removing the (2)
screws using a #2 Phillips screwdriver. Retain
the screws for later use.
You will no longer need the cap cover and, if desired,
you can store it away for any possible future use.
STEP 5.
Remove the (2) M8 buttonhead screws retaining
the cross-brace using provided 5mm Hex key.
Retain screws for later use.
You will no longer need the cross-brace and, if de-
sired, you can store it away for any possible future
use.
STEP 6.
It is now time to install the Personal Viewing
Screen. Remove the PVS with its mounting
bracket and cables from the packaging. Also re-
move the (2) M8 buttonhead screws from the
hardware kit in the packaging.
You can use the foam bag that ships inside the Personal Viewing Screen package to
place the display face onto. This will help protect it from being damaged.