Software Manual - Star Bluetooth Utility for mCollection- Supported Models MCP31LB MCP21LB POP10 Rev. 1.
Introduction l This utility enables you to configure your mCollection printer. l This manual is made for the Star Bluetooth Utility Ver.2.0.0. l The Bluetooth Utility supports the following Windows OS versions: aWindows 7 32-bit and 64-bit aWindows 8 32-bit and 64-bit (except Windows RT) aWindows 8.1 32-bit and 64-bit (except Windows RT 8.1) aWindows 10 32-bit and 64-bit (except Windows 10 Mobile and Windows 10 IoT) * Limitation for Windows 8 / 8.1 / 10 - Desktop UI only.
Bluetooth Utility 1. Getting Started With the Bluetooth Utility Make the following preparations before using this utility. 1. Complete Bluetooth pairing between the PC and the printer, and check the COM port access point. See the "Online Manual" for more information on pairing. 2. Executing the Bluetooth Utility To execute the Bluetooth utility, proceed as follows. 1.
Bluetooth Utility 4. Operating Instructions Please input and set up necessary items and click the [Apply] button. If no item is changed, the [Apply] button will not be active. • Bluetooth Module Info Firmware Version of the connected printer is displayed. • Device Name Bluetooth Device Name of the connected printer is displayed. Notes Regarding Setting a Bluetooth Device Name: 1. The Bluetooth Device Name can use a combination of letters, characters and symbols. 2.
Bluetooth Utility • Setting the iOS Port Name iOS port name is used in the iOS environment. When the Device Name is changed, the iOS Port Name is changed at the same time. To assign the iOS Port Name that is different from the Bluetooth Device Name, follow these steps. Notes Regarding Setting a iOS Port Name: 1. The iOS Port Name can use a combination of letters, characters and symbols. 2. Supported characters are: “a“ - “z”, “A" - “Z”, “0“ - “9”, and Various symbols. 3.
URL: http://www.star-m.
