Use and Care Manual

FOR EASY CLEANING

WARNING: Do not immerse in water. You can clean your Rotato Express

with a damp cloth. It is recommended to remove the batteries and the

entire cutter head and wash separately.

ELECTRICAL ADAPTOR

As an alternative to batteries, an electrical adaptor can be plugged in the

back of the unit. Always select a 6.0 Volt, 600 mA adaptor with the input

/ output polarity as follows: - ___(•___+. When not in use, unplug the

adaptor.

HOW TO CHANGE THE BLADE

Rotato Express blades are specially designed to give clean and easy

peeling or cutting. When the blade skips or jams, or is excessively

clogged, it’s time to change the blade.

1. Turn the Rotato Express upside down and open the blade storage

compartment located underneath the base and remove one of the

new blades.

2. Remove the cutter head by gently pulling the lock-in attachment

from the cutter arm.

3. Unlatch and slide the used blade away from the blade holder. Dispose

of the used blade using the same precautions taken with a sharp

razor.

4. Slide the new blade down the ridge of the blade holder. Make sure

the blade is solidly in place before proceeding to the next step.

5. Put the cutter head back on the Rotato Express by inserting the lock-

in attachment into the cutter arm.

WARNING

Disconnect the adaptor from the Rotato Express and remove the batteries (if

installed) prior to changing accessories or touching the blade holder. Batteries

must be removed from the Rotato Express before it is discarded. The batteries

should be disposed of safely and in accordance with national regulations.