User Manual

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

5. PRECAUTIONA ON USING DRYWALL SANDER

Attention! You must abide by the following basic safety measures against electrical shocks, injuries and

the danger of fire when using electric tools. Read and abide by these instructions before you start to use

any tools. These instructions must be kept in a safe place.

_ The equipment must never be used in surroundings where an explosive atmosphere exists.

_ Do not let the cable touch any parts of your body.

_ Only use the extension cable approved for use in the working area.

_ Do not force the machine for unsuitable work, for example, rough grinding, brushing, etc. Otherwise,

dangers and harms will be caused.

-- Only use identical replacement parts when servicing. Otherwise, risk-free operation can’t be

guaranteed.

--The accessories’ allowed speed must be at least the same as the maximum speed of the machine. Or

else, they may be broken or cracked when their running speed is go over the machine’s allowed speed.

--Do not use damaged accessories. Before use, always check whether the accessories are nicked or

cracked. For example, to grinding pad, please check the support plate is not cracked. Ensure everybody to

be out of the machine’s rotation area and run the machine at max. speed for one minute, which can fully

test the accessories.

-- Do not put down the machine when it isn’t stopped completely. Otherwise, you will loss control to the

machine.

-- Cleaning the exhaust port on your machine in regular.

When working, control the machine firmly with both hands to ensure safe operation.