Use and Care Manual

ELECTRICAL SAFETY INFORMATION

NOTE: The adapter illustrated is for use only if you already

have a properly grounded 2-prong outlet.

NOTE: In Canada the use of a temporary adapter is not

permitted by the Canadian Electrical Code

WIRE SIZES

NOTE: Make sure the proper extension cord is used and is in good

condition. The use of any extension cord will cause some loss of

power. To keep this to a minimum and to prevent overheating and

motor burnout, use the table as below to determine the minimum

wire size (A.W.G.) extension cord. Use only 3-wire extension cords

which have 3-prong grounding type plugs.

CAUTION: USE ONLY THREE-WIRE EXTENSION

CORDS that have 3-pronged plugs and outlets that accept the

tool’s plug. Repair or replace a damaged or worn cord immediately.