0 GALLON AIR COMPRESSOR 3.5HP 125PSI ITEM: 65151 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
IMPORTANT SAFETY INFORMATION DO NOT use the compressor if the switch does not turn it on and off. Any compressor that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the compressor. Such preventive safety measures reduce the risk of starting the compressor accidentally.
IMPORTANT SAFETY INFORMATION USE OF AN EXTENSION CORD IS NOT RECOMMENDED. If you choose to use an extension cord, use the following guidelines: Make sure your extension cord is in good condition. Be sure to use an extension cord which is heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table A shows the correct size to use depending on cord length and nameplate ampere rating.
IMPORTANT SAFETY INFORMATION Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the compressor’s plug. Repair or replace damaged or worn cord immediately. The outlet must be properly installed and grounded in accordance with all codes and ordinances.
FEATURES AND FUNCTIONS MAIN COMPRESSOR OUTPUT PRESSURE GAUGE FAN COVER AIR TANK OUTLET VALVE TANK PRESSURE GAUGE WHEEL DISCHARGE PIPE ONE-WAY VALVE REGULATOR VALVE DRAIN COCK FEATURES 3.5HP Made with Durable Cylinder 10 Gal Long Life with Oil-lubricated motor Delivers 7.2 CFM @ 40 PSI 3.5 CFM at 90 PSI Maximum Pressure: 125 PSI Solid Moving Wheels Factory May change tank color without notice COMPRESSOR AREA SET UP 1. Designate a work area that is clean and well-lit.
START-UP NOTE: At the beginning of the day’s first use of the Air Compressor, check for air leaks by applying soapy water to connections while the Air Compressor is pumping and after pressure cut out. Look for air bubbles. If air bubbles are present at connections, tighten connections. Do not use the Air Compressor unless all connections are air tight, the extra air leaking out will cause the compressor to operate too often, increasing wear on the compressor. CHECKING THE OIL 1.
OPERATION AND MAINTENANCE COLD WEATHER OPERATION Start compressor in heated area if outdoor temperatures drop below 32° F. If this is not practical, drain out the old pump oil and use SAE 10W Non-detergent Air Compressor Oil (sold separately) in the pump crankcase instead whenever the compressor’s temperature will fall below 40°. Do not use multi-viscosity oil (such as 10W-30) - they leave carbon deposits on pump components and lead to accelerated failure. Heavy operation may require heavier viscosity oil.
OPERATION AND MAINTENANCE OIL MAINTENANCE Check the oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6 months, or 100 operation hours, whichever comes first. Replace the oil more frequently if compressor is used in harsh environments such as high heat or high humidity. WARNING: To prevent injury from burns allow the Air Compressor to cool before changing the oil. 1. Place a container underneath the Crankcase. 2.
TROUBLESHOOTING WARNING: Follow all safety precautions whenever diagnosing or servicing the compressor. Disconnect the power supply before service.
PARTS LIST LIST OF GOODS 10
PARTS DIAGRAM 11
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
