Instructions / Assembly

ManualsBrandsStark ManualsPlumbing1.5 HP Submersible Thermoplastic Utility Sump Pump 25 ft. Cord

1.5HP SUBMERSIBLE WATER PUMP, 3700GPH

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

ITEM: 71042

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 4900 MON-FRI 9AM TO 3PM PST

Summary of content (7 pages)

PAGE 1
.5HP SUBMERSIBLE WATER PUMP, 3700GPH ITEM: 71042 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
PAGE 2
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
PAGE 3
IMPORTANT SAFETY INFORMATION Stay alert, watch what you are doing, and use common sense when operating the tool. DO NOT use the tool while you are tired or under the influence of drugs, alcohol, or medication. Dress properly. DO NOT wear loose clothing, dangling objects, or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
PAGE 4
PRODUCT INFORMATION FEATURES TETHER ADJUSTMENT NOTCH Powered by a durable, oil-cooled electric motor UNIVERSAL FITTING Various fittings for outflow included.
PAGE 5
OPERATION This Pump should be plugged into an outlet fitted with a Ground Fault Circuit Interrupter (GFCI). 1. Make sure the Pump rests on a flat, level, and solid foundation. 2. Never suspend the pump from the power cord or discharge pipe. You may firmly attach a rope to the carry handle. 3. Keep the pump inlet openings, near the suction base, clear of debris. 4. Avoid installation in areas of extreme heat or cold. 5.
PAGE 6
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE PUMP MOTOR MAINTENANCE 1. Any repair or replacement of parts should be performed by a qualified service technician. 2. Inlets should be inspected periodically and any debris which clogs them should be removed (Before performing inlet cleaning, disconnect the pump from the outlet). 3. Periodically clean the Lower Base, remove the Screws from the Base and remove any dirt or debris. Replace the Lower Base. NOTE: Many problems occur due a clogged Lower Base.
PAGE 7
WARRANTY PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.