Use and Care Manual

MAINTENANCE

PUMP MOTOR MAINTENANCE

1. Any repair or replacement of parts should be performed by a qualied service technician.

2. Inlets should be inspected periodically and any debris which clogs them should be removed (Before

performing inlet cleaning, disconnect the pump from the outlet).

3. Periodically clean the Lower Base, remove the Screws from the Base and remove any dirt or debris.

Replace the Lower Base.

NOTE: Many problems occur due a clogged Lower Base. Remove the Screws from the Lower Base and

remove the Lower Base. Clean out dirt or debris from the bottom of the Pump and replace Lower Base

using the same screws.

TROUBLESHOOTING

MAINTENANCE AND TROUBLESHOOTING