Use and Care Manual

DIGITAL CONTROL INTERFACE
OPERATOR CONTROL PANEL
Use the operator control panel to start and stop the Variable Speed Pump, program, set, and change
speeds (RPM), and access pump features and settings.
Button 1: Press to select Speed 1 (750 RPM). LED on indicates Speed 1 is active.
Button 2: Press to select Speed 2 (1500 RPM). LED on indicates Speed 2 is active.
Button 3: Press to select Speed 3 (2350 RPM). LED on indicates Speed 3 is active.
Button 4: Press to select Speed 4 (3110 RPM). LED on indicates Speed 4 is active.
Back: Goes one step back in menu; exits without saving current setting.
Save: Saves current item setting. When a parameter has been adjusted the “Save” icon will be displayed.
Menu: Accesses the menu items when and if the pump is stopped.
Select: Press to select the currently displayed option on the screen.
Arrow buttons:
• Up arrow: Move one level up in the menu or increase a digit when editing a setting.
• Down arrow: Move one level down in the menu or decrease a digit when editing a setting.
• Left arrow: Move cursor left one digit when editing a setting.
• Right arrow: Move cursor right one digit when editing a setting.
Quick Clean: Pump increases to a higher RPM (for vacuuming, cleaning, adding chemicals, etc.). LED
light is on when active.
Time Out: Allow the pump to remain in a stopped state for a set period of time before resuming normal
operation. LED is on when active.
Start/Stop: To start or stop the pump. When LED is on, the pump is running or in a mode to start
automatically.
Reset button: Reset alarm or alert.
5