Instructions / Assembly
OPERATION
3
OPERATION
1. Slowly open propane tank valve.
2. Press the knob and turn it counterclockwise
to the 90 degree ON position. When you
hear a click, observe the re. If it is already
lit, continue to press the RANGE KNOB for
3-4 seconds before letting hands out. Please
repeat the above ignition method.
OFF
OFF
OFF
ON
ON
ON
3. When the knob is turned to the 90 degree position, the repower is the maximum. You can continue to
adjust the repower counterclockwise or clockwise.
4. Turn the RANGE KNOB to the OFF position and you can extinguish the re.
NOTE: CONNECTING A NEW GAS SOURCE OR STOVE HAS NOT BEEN USED FOR A LONG TIME,
THERE MAY BE AIR INSIDE THE HOSE. YOU MAY NOT IGNITE THE STOVE AT THE FIRST TRY. AT
THIS TIME, THE OPERATION CAN BE REPEATED UNTIL THE AIR INSIDE THE HOLE IS EXHAUSTED.
NEVER PUT YOUR HEAD CLOSE TO THE BURNER WHEN IGNITING TO AVOID ACCIDENTS.
TROUBLESHOOTING