Operations Manual

Operation | 17 16 | Operation
Volume Control Indicators
Your hearing professional may enable audible
indicators, which highlight the current volume
position�
Memory Change
Your hearing professional may
create multiple memories within
your hearing aid� These additional
memories can be accessed by
activating the user control on your
hearing aid�
If your user control is configured for memory changes,
each time you activate the user control, the memory
of your hearing aid will increment through the
available memories�
Memory Indicators
Your hearing professional may enable an audible
indicator, which is presented while making a memory
change� The indicator defaults to a voice identifying
which memory your hearing aid is in�
Mute
If your hearing aid is configured with mute
functionality, a long press and hold of the user control
will mute your hearing aid� If enabled by your hearing
professional, you may hear an indicator prior to the
hearing aid muting�
Battery Indicators
An indicator will sound when the battery voltage is
low� You have approximately 30 minutes* of battery
life remaining� An indicator may also sound just before
the battery stops working�
*Actual time between low battery indicator and shut down will vary depending
on environmental noise levels and your use of the product.
Volume Level
Tone
Volume Max
5 Beeps •••••
Volume Step(s) Short Tone
Volume Home
(Power on volume level)
3 Beeps •••
Volume Step(s) Short Tone
Volume Min Single Beep
My hearing aid is configured with the following
control:
Press and Release Volume Control
Press and Hold Volume Control