Operations Manual
Operation | 15 14 | Operation
Power On & Off
To turn ON:
Insert a battery and completely close the battery
door� Your hearing aid has a power-on delay that may
require a few seconds� You may hear a tone indicating
that your hearing aid is powered on�
To turn OFF:
Open the battery door until the battery is no longer
touching the battery contacts�
Auto On/Off
Your hearing aid may support the ability to
automatically go into a low-powered state to conserve
battery� This control can be configured by your
hearing professional or via the Thrive Hearing Control
app� Place your hearing aid on a flat, stable surface
(e�g� a table) with your earmold or earbud facing
upwards and it will go into a low-powered state after
about 15 minutes� To resume normal hearing aid
function, pick up your hearing aid and place it in your
ear� Your hearing aid will detect this motion and switch
back on again� You may hear a tone indicating that
your hearing aid is powered on�
User Controls
Your hearing aid’s user control may have been
customized by your hearing professional� Ask your
hearing professional how the user control on your
hearing aid is set�
Available User Control Functionality
The user control on your hearing aid can
respond differently depending on how
long you activate (press) the button� Your
hearing aid is capable of having one
function assigned to a short press (press
and release) and one function assigned to
a long press (press and hold)�
The options selected below indicate how your user
controls are configured�
Tap Gesture
Your hearing aid may support
an additional user control� This
control can be configured by your
hearing professional to start/stop
streamed audio from a 2�4GHz
accessory by tapping your ear
twice�