User's Manual

Operation
Low Battery and Recharging
If SurfLink Mini Mobile Adapter is on and enters a low
battery condition, the LED slowly pulses red until it
automatically shuts down, or until a recharging power
source is applied. When the Mini Mobile Adapter is
attached to a power source, the LED becomes solid
green and recharging automatically begins. When
power is on, the solid green LED will be interrupted
by other LED behaviors. When the battery is fully-
charged, the solid green LED turns off.
Typical Charging Method
To recharge the battery, attach the microUSB end of
the recharging cable to the female microUSB jack on
SurfLink Mini Mobile Adapter. Attach the USB end of
the recharging cable to a female USB jack, such as
found on a plugged-in wall
power adapter, car charger
adapter, or computer.
You can recharge both SurfLink
Mini Mobile Adapter and
SurfLink Remote Microphone
at the same time while they
are attached. While recharging,
you can stream audio for
extended periods.
Multi-Function Push-Button
Powering On/Off
Power On – When power is off, press the push-button
for 2 seconds and release it. The LED briefly turns
green to verify power is on.
Power Off – When power is on, press the push-button
for 2 seconds and release it. The LED briefly turns red
to verify power is off.
Bluetooth Pairing
For SurfLink Mini Mobile Adapter to receive streamed
audio from your Bluetooth device, you must first
Bluetooth pair it. To start the Bluetooth pairing
process, put your Bluetooth device into pairing
mode. If you are unfamiliar with the Bluetooth pairing
process, consult your Bluetooth device’s operations
manual.
To put SurfLink Mini Mobile Adapter into an active
Bluetooth pairing state, ensure it is powered on and
not Bluetooth-connected to other devices (the green
LED will be slowly pulsing). Double-click the push-
button so that the LED starts rapidly blinking blue.
The Mini Mobile Adapter remains in an active pairing
state for up to 60 seconds. When it appears, select
the product name (SurfLink Mini) on your Bluetooth
device. A green LED for 2 seconds confirms a
28 29
Operation
Operation