User's Manual

Operation
Low Battery and Recharging
If SurfLink Remote Microphone is on and enters
a low battery condition, the LED slowly pulses
red and provides an audible indicator tone to a
hearing instrument. The indicator tone is distinctly
different from the low battery indicator for a hearing
instrument, so there is no confusion as to which is
experiencing a low battery condition. Once SurfLink
Remote Microphone enters a low battery condition,
the indicator tone will occur about every 5 minutes
until SurfLink Remote Microphone automatically shuts
down, or until a recharging power source is applied.
When SurfLink Remote Microphone is attached
to a power source, its recharging automatically
begins. While SurfLink Remote Microphone is off,
the LED turns solid green during recharging and
turns off when fully charged. While SurfLink Remote
Microphone is on, the LED prioritizes streaming by
slowly pulsing blue, but continues recharging in the
background.
TIP – Recharging SurfLink Remote Microphone can
take longer while streaming audio. Recharging will be
faster when the SurfLink Remote Microphone is off.
Typical Charging Method
To recharge the battery,
attach the microUSB end
of the recharging cable to the
microUSB jack on SurfLink
Remote Microphone.
Attach the USB end of
the recharging cable to a
female USB jack, such as
found on a plugged-in wall
power adapter, car charger
adapter or computer.
10 11
Operation
Operation