User's Manual

Car Charger Adapter
The SurfLink Remote
Microphone can be recharged
using a car charger adapter.
These adapters can be
obtained from your hearing
professional (ask for part
#52869-000).
Power On/Off Slider
Power On – Move the slider
toward the microUSB end to
turn on. The LED turns green
for 2 seconds to verify power
is on.
Power Off – To stop streaming
audio, move the slider away
from the microUSB end until
the brightly colored surface is
exposed. The LED turns red for
2 seconds to verify power is off.
Syncing
Syncing establishes a relationship between your
hearing instruments and SurfLink Remote Microphone.
For hearing instruments to receive streamed audio
from SurfLink Remote Microphone, you must first
sync the hearing instruments with SurfLink Remote
Microphone. You only have to sync SurfLink Remote
Microphone with your hearing instruments once, as
they will automatically link when both are powered on
and they are within wireless operating range.
To put SurfLink Remote
Microphone into an
active syncing state,
press the “Sync” icon
on the Power On/Off
slider for 5 seconds
until the LED starts
rapidly blinking blue. To sync a hearing instrument
with SurfLink Remote Microphone, open your hearing
instrument battery door, insert a battery, and close
your hearing instrument battery door.
12 13
Operation
Operation