Operation Manual

34
• Remove the tubing
from the BTE by using
your fingernail to
pull the colored nose
cone AWAY from
the instrument. DO
NOT PULL ON THE
TUBING.
• Holding the tubing by
the thicker area where
the retention lock joins
the tubing, gently pull
the earbud or open
custom earmold off
the tube.
• Use the wax reamer to
remove wax and debris from the inside of
the tubing. Once the tubing is disconnected from
the BTE, thread the wax line end into the nose
cone. Push the line through the entire tubing
length. Remove.
HANDLING AND CARE