Operation Manual

18
Preparation
Insertion and Removal
To insert the earbud or earmold:
1. Hold the cable at the bend in front
of the receiver with your thumb and
forefinger. Gently insert the receiver
into your ear canal (fig. 1).
2. Wrap the hearing instrument over the
top of your ear, carefully placing it
behind your ear (fig. 2).
3. Place the retention lock inside the bowl
of your ear (fig. 3).
To remove the earbud or earmold:
1. Remove the retention lock from the
bowl of your ear.
2. Remove the hearing instrument from
behind your ear.
3. Grasp the receiver with your thumb
and forefinger. Gently pull out of your
ear canal.
Do not pull with the hearing instrument case
as this may damage the connection.