O P E R AT I O N S M A N U A L
Table of Contents Introduction 5 Basic Use 6 Getting Started 11 Power Button 11 Touch Screen Display 11 Volume Up Button 13 Volume Down Button 13 Micro-USB Jack 13 Built-In Microphones 15 Performance Overview 15 Operation 16 Adjusting Settings in your Hearing Devices 16 Streaming Cell Phone Calls 18 Call Waiting 22 Streaming Audio 23 Streaming Bluetooth Landline Phone Calls 26 2 Tools 30 Bluetooth Features 30 Manage Paired Bluetooth Devices 34 Brightness 37 Syncing Hearing Devices 37 Choose
Introduction SurfLink Mobile is designed to interface with your wireless hearing devices in multiple ways: • As a cell phone streaming device • As an audio streaming device from: – Bluetooth devices – Line-in input via the micro-USB jack – Built-in omni (“Surround”) and directional (“Focus”) microphones • As a remote control to make hearing device setting adjustments Streaming – Audio or sound transmitted wirelessly from SurfLink Mobile to your hearing devices.
Basic Use 1. Power Button 1 Basic Use Basic Use • Long press and hold (5 seconds) powers on or powers off SurfLink Mobile • Short press and release wakes or hides display while SurfLink Mobile powered on 2. T ouch Screen Display – Press and release on touch screen buttons to make selection 3 4 2 3. V olume Up Button – Press and release to increase sound levels 4. V olume Down Button – Press and release to decrease sound levels 5.
To Sync your Hearing Devices with SurfLink Mobile: To Stream Audio: 1. Select lower middle icon to navigate to Streaming screen 1. See page 37 for more details 100% 100% To Pair a Bluetooth device (including cell phones) with SurfLink Mobile: 100% Left Both Right Just Talk 1. See page 30 for more details Memory Disconnect 100% Mute To Operate Remote Control: 1. S elect lower leftMuteicon toHome navigate to Remote screen 2. See page 16 for Remote moreScreen details Swap Call 2.
Basic Use Phone Call Screens 100% 100% Incoming Call Incoming Call Power Button Memory Disconnect Mute Home 5557635432 Unknown Caller 5557635432 100% 100% Incoming Call Remote Tab To Make Outgoing Phone Calls: Incoming Call 1. Dial call on your connected cell phone Disconnect Memory Phone 2. Once call is dialed, screen Connect appears on 5557635432 SurfLink Mobile Incoming Call Incoming Call Caller Name 3.
Status 20% The taskbar at the top of the display provides status information: Getting Started 100% 80% 80% 60% 40% ve ve 60% 40% 100% 20% 80% 100% 10% 60% 80% 20% 40% 60% ed 20% ed 20% 40% es es Notes When the SurfLink Mobile Bluetooth antenna is On, indicator will display on the left side of the taskbar. When the Bluetooth antenna is Off, no indicator will display. If an advisory message is available, indicator will display in the center of the taskbar.
Getting Started Built-In Microphones SURF L INK Fig. 2 The SurfLink Mobile battery can also be charged via a computer USB jack Fig. 3 or an optional car charger adaptor, although it may take longer than recharging via a wall outlet. Charging time may also take longer if the SurfLink Mobile is streaming audio while it is being recharged. SurfLink Mobile includes built-in microphones for gathering sound. The Directional Microphone (“Focus”) receives sound from a particular direction.
Remote Layout Remote Layout Remote Layout Remote Layout Remote Layout Remote mote Layout) Operation 100% 100% 100% Memory Change 100% Adjusting Settings in your Hearing Devices Left Remote Screen (created by Remote Layout) Memory Mute 100% Favorite Memory Home Remote Layout Setup Screen Favorite 100% Highlighted buttons will appear on Remote screen Highlighted buttons will appear on Remote screen Memory Memory 100% 100% Highlighted buttons will appear on Remote screen Mute Favor
Memory Both Answer 5557635432 Home Disconnect Right (2b) To Decline the incoming call: Remote Tab • Select the Do Not Answer button OR Phone Call Screens Phone Calls Phone Call Screens 100% Answer (1) When SurfLink Mobile Incoming Call Incoming Call Incoming Call 100%incoming is Caller On and an Name Caller Name call isXXXXXXXXXX received XXXXXXXXXX by a connected cell phone, an Incoming Call screenDo appears.
Just Talk Just Talk (3a) Either JustTalk (uses theJust hearing Talk SurfLink Mic device microphone) or SurfLink Mic (uses the built-in SurfLink SurfLink Mic Mobile microphone) can be used to pick up your voice during a phone call. Select desired voice input option by toggling between JustTalk and SurfLink Mic. Talk k Mic Operation (3b) Select the Mute button during a phone Mute call to mute your own Connect voice. Unmute your voice by unhighlighting the Mute button.
5557635432 Mute Unknown Caller 5557635432 Operation Disconnect Incoming Call Caller Name XXXXXXXXXX Incoming Call Caller Name XXXXXXXXXX Do Not Answer Do Not Answer Incoming Call Waiting Connect SurfLink Mic Just Talk Mute Swap Call End Call If both Just Talk and SurfLink Mic are available End Call + Answer Hold Call + Answer Do Not Answer Hold Call + Answer End Call + Answer End Call + Answer SurfLink Mic Mute Swap Call SurfLin Phone Call Screen Favorite Swap Call Handset Incomin
Streaming Screen 100% 100% Tablet Line-In Surround mp3 Player No hearing devices are synced at this time (1) Select the Streaming icon at the bottom of the Landline Tablet display to navigate to the 100% 100% Streaming screen. Tablet Tablet Focus mp3 mp3Player Player Streaming Screen Stream Active: no button pressed.
Tablet Tablet Remote Screen Landline ote: For this button to N be available, the Bluetooth antenna must be On, the Bluetooth device needs to be actively connected with SurfLink Mobile, and Bluetooth device needs to be powered on and within range of SurfLink Mobile. Landline Handset Call Screens (1) When SurfLink Mobile is On and Left an incoming call Both Right is received by connected Bluetooth landline phone, Memory Favorite the Headset Incoming Call screen appears.
Remote Layout Setup Remote Screen (Highlighted Setup Screen will appear (Highlig on SurfLink Mic Both Right buttons LeftLayout Just Ta Just Talk 100% Remote Screen Phone Call Waiting Screen Phone Call Screen et Call Screens (4) After answering an incoming landline call Right Incoming Call (or initiating an outgoing landline call), the Headset Favorite screen is displayed.
100% 100% 100% 100% 100% Pairing Mode Bluetooth “Tim_iPod” has been paired Pairing Mode Brightness Settings > Bluetooth Screens Tools 100% Settings Bluetooth Features successfully 100% Choose Icon Bluetooth “Tim_iPod” Bluetooth has been paired Pairing Mode To stream audioBrightness (including cell phone calls) using successfully (error) SurfLink Mobile, you must first pair your Bluetooth Settings Paired Devices Choose Icon Bluetooth device with SurfLink Mobile.
Settings mp3 Player Paired Devices Choose Icon Bluetooth Choose Icon (error) (5) Confirm the Bluetooth pairing on Bluetooth device. > Bluetooth Screens If you are unfamiliar with Settings the Bluetooth pairing process, Bluetooth consult your Bluetooth device owner’s manual.
100% 100% 100% 100% 100% 100% 100% 100% 100% 100% Pairing Pairing Mode Mode Bluetooth Bluetooth “Tim_iPod” “Tim_iPod” Cell Cell Phone Phone hashas been been paired paired Brightness Brightness Pairing Pairing Mode Mode successfully successfully Phone Phone Manage Paired Bluetooth Devices Settings Settings Paired Paired Devices Devices 100% 100% Retry Retry Choose Choose IconIcon Bluetooth Bluetooth (2) Select Bluetooth button on the Tools screen.
Paired Devices mp3 Player Retry Choose Icon Bluetooth Cancel Choose Icon (error) (6) Select a specific Bluetooth device button SCH-1545 on Paired Devices screen Kevin_Kindle Pairing to Modesee details on its active Bluetooth Connection with Tim_iPod Paired Devices SurfLink Mobile.
tings > Advanced Setup Settings > Advanced Setup > Hearing Devices Screens Synced Hearing Devices: 100% 100% Bluetooth Brightness (1) Select the Tools icon at Advanced Setup the bottom of the display to navigate to Display the Tools Phone screen. 100% General (2) Select Settings button on the Tools screen. Settings Settings (3) Select Advanced Setup Devices buttonHearing on Settings screen. (6) Select the Sync13134782 New button to put the 13134803 SurfLink Mobile into syncing mode.
Please Wait 13134803 13134803 from SurfLink Mobile? Sync New OK Cancel (9) Hearing devices will be detected by SurfLink Open and close the battery Mobile and door the serial If Inspire fitting session is of the hearing device(s) open, please close it now. wish to Sync. Devices numbers willyou be shown will be automatically detected and displayed. on the display.
Settings > Advanced Setup > Features (5) It is possible to limit Hearing Devices SurfLink Mobile functionality Features by turning On or Off specific Remote Layout Features. 100% 100% Omni Mic (”Surround”) Directional Mic (”Focus”) Line-In Audio Bluetooth Media and Bluetooth Phone Calls Off emote Control button R Advanced Setup Features – if On (highlighted), then Remote screen will be available to user.
Settings > Advanced Setup > Features Settings > Advanced Setup > Remote Layout ed Setup > Features Settings > Advanced Setup > Remote Layout Remote Layout (5) Remote Layout 100% 100% Hearing Devices (1) Select the Tools icon Featuresat the bottom of the display Remote Layout to navigate to the Tools Language screen.
Advanced Setup Features Advanced Setup Bluetooth Remote Layout Synced Hea Brightness Settings > Advanced Setup > Language Settings > Display Settings > Advanced Setup > Remote Layout LanguageSettings > Advanced Setup > Features 100% Settings LockSettings 100% (1) Select the Hearing Tools icon at Devices the bottom of the display Features to navigate to the Tools Remote Layout screen.
Features Hearing Devices Highlighted buttons will Advanced Setup Settings Lock Remote Layout appear on Remote screen Off Language AdvancedSetup Setup Settings > Advanced > Language Features Remote Layout Display edSettings Setup >>Language Advanced Setup >Settings Remote > Layout Display Options Memory Favorite Mute Home Language Settings Lock Off 100% Phone Options 100% Advancedicon Setup at Remote Layout (1) Select the Tools Highlighted buttons will Advanced Setup appear on Remote scree
Settings Lock: Remote Layout Bluetooth Media and Directional Mic Bluetooth Phone Calls (”Focus”) Off Advanced Setup Language Settings Lock: Features Line-In Audio Advanced Setup Settings Lock Features Off Home Mute Memory Advanced Setup Language Settings > Phone Bluetooth Media and Bluetooth Phone Calls Off Advanced Setup Settings Lock Remote Layout Phone Call Screens Favorite Remote Layout Settings > General Off Home Mute Advanced Setup Remote Layout N o-Look Answering – If (4) e
ttings > General (8) Select About button on Default Power On Screen: General screen to obtain Remote Streaming detailed information about SurfLink Mobile. 100% Advanced Setup Display Phone 100% General Reset Settings General 100% 100% Do you really want to reset Surflink Mobile to factory settings? Firmware version: Serial number: About Note: Selecting OK will restart SurfLink Mobile.
The clip and lanyard accessories allow the SurfLink Mobile to be worn for hands-free use. The Base Clip attaches directly to SurfLink Mobile. The Base Clip attaches to either the neck-worn Lanyard or Belt Clip. Base Clip Front/Back Lanyard Attachment the desired attachment into the center position of the Base Clip (Figure 8) and slide into position at one end of the Base Clip to lock the attachment into place (Figure 9). Fig. 6 Belt Clip Attachment Fig.
Bluetooth Overview Bluetooth is a wireless communication technology used to transmit audio and data. A connected Bluetooth device (cell phone, MP3 player, computer, etc.) can wirelessly share audio or data with the SurfLink Mobile, which in turn can stream audio to synced hearing devices. A Bluetooth device you wish to use with your SurfLink Mobile must support the appropriate Bluetooth profiles.
SurfLink Mobile is designed to comply with the most stringent Standards of International Electromagnetic Compatibility. However, it is still possible that you may experience interference caused by power line disturbances, airport metal detectors, electromagnetic fields from other medical devices, radio signals and electrostatic discharges.
Note: Le manufacturier n’est pas responsable de l’interférence créée par la modification de cet équipement lors de l’écoute du téléviseur ou de la radio. De telles modifications pourraient entrainer la révocation de l’autorité de l’utilisateur à opérer cet équipement. Notes Hereby, Paradigm declares that the SurfLink Mobile is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be obtained from the addresses below.
Notes 62 Notes 63
© 2014 Paradigm, Inc. All Rights Reserved.
