Instructions
The app may look slightly different depending on your phone and/or hearing aid model.
The Starkey logo, Thrive, Thrive logo, Inspire and TeleHear are trademarks of Starkey Laboratories, Inc. | Apple, the Apple logo, iPhone, iPod touch, App Store and Siri are trademarks of Apple, Inc., registered in the U.S. and other
countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. | The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks is under license. | Google is a trademark of Google LLC. ©2021 Starkey Laboratories, Inc. All Rights Reserved. 8/21 FLYR3475-03-EE-SC
Device Settings
Advanced settings for the hearing aids can be turned on/off or set in this menu.
About My Devices: Displays the model, technology level and serial numbers of the
hearing aids as well as the current firmware version.
Alerts: Turning on Alerts allows an indicator to be played in the hearing aids for calendar,
email and social media notifications. Press the blue button to preview the alerts.
Tap Gesture: Turn the tap gesture on or off. Double Tap feature controls Accessory Start/Stop
Stream, Edge Mode and Thrive Assistant. Set preferred functionality for the right and left hearing aids by
tapping the . Set the tap sensitivity to Less, Default or More. Available for AI hearing aids only.
Car: Turn Automatic Car on or off. Tap Ok to allow access to the phone’s motion sensor to provide
automatic memory changes when in a vehicle achieving a speed of 10 miles per hour or greater.
Set which memory the Automatic Car mode uses by clicking the and selecting the preferred memory.
Data Log: Turn Data logging on or off. Turning off Data Log eliminates the ability to generate an Engagement Score.
Auto Streaming: Turn Auto Streaming on or off. Auto Streaming is on by default following programming in Inspire X.
Auto Streaming will use Stream Boost by default. If Auto Streaming is turned off, the memory will not change when streaming.
• Phone Call: Select which memory the Automatic Phone mode uses by clicking on the and selecting the
preferred memory. Also select how the hearing aid microphones will perform during phone call streaming.
Tap No Change, Decrease (50%) or Mute to indicate microphone preference.
• Media Audio: Select which memory the automatic media streaming mode uses by clicking on the and
selecting the preferred memory. Also select how the hearing aid microphones will perform during media
streaming. Tap No Change, Decrease (50%) or Mute to indicate microphone preference.
Auto On/Off: Tap the slider to deactivate/activate Auto On/Off. Auto On/Off allows the hearing aids
to automatically go into low power mode when not in use. Available for AI hearing aids only.
Thrive Assistant Mic: Tap HA Mic or Phone Mic to select preference for which microphone is used by
Thrive Assistant. HA Mic is the default setting.
Wellness Score Setup
Set activity tracking information to ensure the most accurate calculations of the Wellness Score.
• Activity Tracking: Customize activity score goals including Steps, Exercise and Stand.
Information can be modified at any time by going to Settings > Wellness Score > Activity Tracking.
D
e
v
ice
S
e
tt
i
n
g
s
S
e
tt
i
n
g
s
A
uto
S
tr
ea
m
i
n
g
D
a
t
a
o
g
C
om
f
ort
oost
T
h
r
i
v
e
A
ss
i
st
a
nt
i
A
b
out
m
de
v
ie
s
A
le
rts
T
a
p
e
stur
e
C
a
r
A
uto
O
n
/
O
ff