User's Manual

13
Let’s get to know CamBall’s Functions, Modes, and Recording Types!!
● Power ON / OFF
Press the center button for more than 2 seconds to turn ON / OFF the system.
Press for 2 sec.
● Reset Button
When the system does not operate properly, press this button with
a thin object.
● Use Button Hold
To prevent unintentional button operation, you can turn ON or OFF [Button Hold]
function by pressing the Center & [▽] button together and holding for 2 seconds.
Press for 2 sec.
● Power Saving (Motion Detection)
To minimize waste of battery and memory, use Power Saving mode. Press [▷] button for 2 seconds
to turn ON/OFF this function. When if this function is ON and CamBall starts recording, it only
records when any motion detected. The color of the Power Saving Lamp is Red when it is ON.
Lamp Status when Power Saving is ON