User's Manual

***

You may encounter discontinuance of audio sound when you playback files. This does not indicate a product

defect. When you set CamBall to Power Saving Mode to achieve a longer battery life, CamBall goes into sleep mode

and does not record when there is no motion detected after the very last motion detection. CamBall comes out of the

sleep mode every 2 seconds to check if there is motion, and if it does not detect motion, then it repeats the process

of going into sleep mode and checking for any motion every two seconds. However, it does not record audio when

there is audio if there is no motion. This will result in discontinuance audio sound during playback.

● Status of CamBall

Press [▽] button to check On and Off status for each function with indication of 5

different types of Green, Red, Red & Green, Red Blink and Green Blink.

Lamp Colors for each Function

[Overwrite] - [ON]: When Memory is full, the oldest files get deleted in order.

[Overwrite] - [OFF]: When Memory is full, CamBall stops recording. From the [Menu Mode], if

[Memory Full Status] is ON, then Memory status lamp blinks for 5 minutes.