User's Manual

22
Lamp Status when Recording
*** If you turn off the overwrite function and the memory is full when recording, the unit will stop from recording.
If you try to record video on this occasion, then the memory status lamp will blink for 5 times to indicate that
the memory is full.
*** If you are recording onto the built-in flash memory, then a file gets created for every hour or 20MB of file size
while recording images. In the Power Saving Mode, a file gets created for every 20MB. If the unit is recording
onto the micro SD card, then a file gets created by every hour or 300MB of file size.
Creating a file by 20MB, 300MB or by the hour will prevent you from deleting large sized files when you turn
on the [OVERWRITE] feature.
*** Please make sure that your PC has MPEG4 codec to playback the video files. You may also playback the
video files with Divx.
Video/Audio File name is created by [Year/Month/Day/Time-Number].
Example) B07122514-001: File is recorded on December 25, 2007 at 2:00 P.M.
M07122515-002: File is recorded on December 25, 2007 at 3:00 P.M.
’B’ stands for ‘Built-in Memory’ and ‘M’ stands for Micro SD Card’
File extension names are as below:
Video/Audio File: xxx.AVI / Audio File: xxx.WMA / Photo File: xxx.JPG
It’s also possible to start recording in [Menu Mode] but in this case, the
[Power Saving] feature is turned off automatically.