User's Manual

38
1. When CamBall is connected to PC, regardless of existence of Micro SD Card, 2 disks will be created.
The disk name for the Built-in memory is [PG] and the name for the micro SD card is [PG SD]. In the [PG]
drive, there are 3 folders of CONFIG, PHOTO, and VIDEO. You must delete the CONFIG folder from the
Drive. Please note that you have to format the Micro SD card at least once in the menu mode to see the
disk name to read [PG SD], otherwise it will display a different disk name.
2. Copy the upgrade file into this Drive and disconnect CamBall from PC. In about 5 seconds, the unit
turns off the power for you to turn on again for upgrade.
3. You can find the new version number from the [Menu Mode] to check for the successful upgrading.