User's Manual

102
“Record”: You can choose to record or not to record the image and the audio which
are being recorded in the Self-Guard connected to your local computer.
“Sensor Alarm On/Off”: If the state of a sensor of the Self-Guard is changed, then
you can choose to notify with an alarm to your local computer. Select an alarm (wave
data) from “Browse”, and listen to the sound before you decide the alarm sound. You
can set the duration of the alarm from 0 to 10 seconds.
“Motion Alarm On/Off”: If Self-Guard detects a motion by the motion detection
algorithm, then you can choose to notify with an alarm to your local computer. Select
an alarm (wave data) from the “Browse” and listen to that sound before you decide
according to your preference. You can set the alarm duration from 0 to 10 seconds.