User's Manual

Memory Card Slot: This is the place where you put in the standard RS-MMC memory

card. If you need to expand the memory from the built-in, internal memory, you can get

this from where you have purchased the Self-Guard. This product provides a memory

card, which lacks in memory.

Cautions

: Do not insert or remove the memory card from the slot while recording or

searching. If you want to remove the memory card from the slot, then you must exit

from “RECORD” or “SEARCH” mode fir, before removing the memory card from the

slot.

Insertion of RS-MMC Memory Card

Camera Hole 1 (Built-In): Self-Guard has one built-in CCD camera on the front side of

the Self-Guard. Be sure that this camera hole is not blocked to prevent from the Self-

Guard unable to record the images.

Camera Hole 2 (Optional): Self-Guard can be installed with another CCD camera on

the rear side to record images from the back of the Self-Guard.

Mic Hole 1 (Built-In): This is where a highly efficient microphone is installed on the

front side of the Self-Guard. Be sure that this hole is not blocked in order to record the

audio.